- The Online Magazine for the Sign Trade.
Home | Site Map | Buyer's Guide Search  
Event Calendar Article Archive Message Boards Classifieds Product Showcases News Advertise Search Join Now

  3-D Signs
  Awnings &
  Flexible Face
  Business Development
  CNC Routing
  Computer Technology
  Digital Imaging
  Dynamic Digital
  Finishing & Lams 
  Flatbed UV
  Garment Decoration
  LED Displays
  LED Lighting
  Neon & LED
  Channel Letter
  Painted Signs
  Screen Printing
  Vinyl Signs
  Hot Shots
  Press Releases
  Tips & Tricks
  Industry Resources
  Event Calendar
  Business Center
  Retail Sign Shops
  Advertising Info

Supply 55 BannerPRO, EcoPRO continuous ink supply system, guardian laminators, quickmount


Updated: February 20 2019 - Feel free to post below. By doing so, you are agreeing to follow our Acceptable Use Policy. If you'd like to contact us, drop us an e-mail here.

General : 


Sign China 2019
Pro Vehicle Outlines 2016 car and truck wrap templates

Goto Thread: PreviousNext
Goto: Forum ListMessage ListNew TopicSearchLog In
zip track help
Posted by: paulg (
Date: January 08, 2009 09:40PM

I have a customer that wants zip tracks for changable letters on aluma board material. The catch is he wants it to be double sided and the material is only 1/4". What suggestions would you have to mount the tracks? Adheisives, pop ribets, screws, etc. Where in the middle of this project right now any info would be greatly appreciated ASAP.

Re: zip track help
Posted by: geraldi (
Date: January 11, 2009 01:45PM

On 1/4 inch material your only choice is double back tape or other adhesive. This won't make a strong assembly. It will tend to bow in the middle. I would use thicker material or use 2 pieces of material, one for each side with something between them to give it strength. It would be stronger, more ridged, and you can use screws. We usually glue the strips on and then use screws or rivets for security. But we usually use plexiglas to build redader boards as they are usually lit. Good luck.

Re: zip track help
Posted by: M4MarketingMentor (
Date: January 11, 2009 02:59PM

Maybe too late now, but weld-on glue to white acrylic is the best for changeable letters because it allows no gaps along the length and letters stay put because they're "both" plastics.

Always remember, plastics vs. metals "always" cause a major expansion and shrinking problem between the two composites.

If you must use the alum product; after careful aligning, attempt frequent fastening every 4-6 inches, plus a clear 100% silicone adhesive that may allow some expansion. Ques.?? Is this 1/4 alum backed-up with another strong substrate ? or is that it ?

Sorry, only registered users may post in this forum.

RENOLIT Calendered Vinyl - Top performance for various applications

Advertising Info
About Us
Contact Us
Privacy Policy
Site Map
Industry Resources
Retail Sign Shops
Product Showcase
Event Calendar
Tips & Tricks
Message Boards
Buyer's Guide Listings
Add My Company
Edit My Company


Copyright 1999-2019, All Rights Reserved.