Dye Sublimation And The Sign Business
SignIndustry.com - The Online Magazine for the Sign Trade.
Home | Site Map | Buyer's Guide Search  
Event Calendar Article Archive Message Boards Classifieds Product Showcases News Advertise Search Join Now

CATEGORIES
  3-D Signs
  ADA
  Architectural
  Awnings &
  Flexible Face
  Banners
  Business Development
  CNC Routing
  Computer Technology
  Digital Imaging
  Dynamic Digital
  Electric
  Estimating
  Finishing & Lams 
  Flatbed UV
  Garment Decoration
  Installation
  LED Displays
  LED Lighting
  Neon & LED
  Channel Letter
  Outdoor
  Painted Signs
  Screen Printing
  Sublimation
  Vinyl Signs
   Articles
   Product
   Showcase
   Message Board
   Tips & Tricks
  Hot Shots
  Press Releases
  Tips & Tricks
  Industry Resources
  Books
  Event Calendar
  Associations
  Business Center
  Retail Sign Shops
  Advertising Info

SignLab from CADlink


Dye Sublimation And The Sign Business

Diversifying with subliminated products

By Jack Franklin & John Pratt

Many sign shops are increasing their bottom line by diversifying with sublimated products. Many others are interested, but don't know enough details to decide if it's right for them. This article will provide you with the basics of the dye sublimation process and the opportunities it presents.

Check It Out!

  • Vinyl Articles
  • Industry Alert
  • Hot Shots Photo Gallery
  • Message Boards

    Visit Our Advertisers:

  • 3M Commercial Graphics
  • CADlink Technology
  • Clarke Systems
  • Estimate Software
  • International Sign Assoc.
  • JetUSA
  • Matrix Payment Systems
  • SGIA Specialty Graphics Imaging Assoc
  • Supply 55, Inc.


  • Dye sublimation is a process that uses a special heat sensitive dye to print graphics and text onto paper, which is then transfered to the final substrate. The paper is then placed on a sublimatable item (shirt, mousepad, plate, aluminum blank, plastic blank, etc.) and both are placed into a heat press for about 40 seconds at 350-400 degrees, depending upon the type of material to trasfer the dyes from the paper to the substrate.

    When the (sublimation) cycle is completed, the image on the paper has transferred to the item and has actually become a part of the surface. If you run your finger across the surface of a sublimated plate you will feel nothing.

    This is because true dye sublimation is done on a polyester, polymer, or polymer coated item. At high temperatures, the solid dye converts into a gas without ever becoming a liquid. Hence the definition of what "Dye Sublimation" is. The same high temperature opens the pores of the polymer and allows the gas to enter. When the temperature drops, the pores close and the gas reverts to a solid state. It has now become a part of the polymer.

    For this reason, true dye sublimation cannot be done on natural materials, like 100% cotton. Natural fibers and non-coated materials have no "pores" to open.

    Inkjet printers, like several Epson models and a few Ricoh models, use a liquid filled inkjet cartridge that has a suspension of the sublimation dye in it. Because of the liquid, transfers has to be printed on special, coated inkjet paper, so that the liquid won't soak into the paper.

    RENOLIT Calendered Vinyl - Top performance for various applications

    The inkjet printer should be dedicated to sublimation, as the cartridges cannot be easily or cheaply switched with regular cartridges, for regular document printing.

    Monochrome (single color) laser printers (like the HP III, 4 and 5) use a regular cartridge that has been re-engineered to deliver the special (dry powder) sublimation toner dye correctly. Like regular laser printer cartridges, laser dye sublimation cartridges only need ordinary copier paper for transfer printing.

    Because a laser dye sublimation cartridge is completely self-contained, there is no problem in using the same printer, with a regular cartridge, switched back-and-forth to print regular documents also.

    Except for the few shops trying to do T-shirts and ball caps, 95% of the work done in most sign shops is producing black print on gold-tone plates. Because of this, most shops use a monochrome laser printer for this type of work.

    Not only does a laser printer produce faster and cheaper transfers than many inkjet printers, the images produced are a deep black. A black image from a laser sublimation cartridge will compare very closely to screen-printing.

    Full color inkjets can produce nice colors, but it must be used on whites or very light colors. This is because the dye goes on much thinner with inks than with laser sublimation cartridges. This allows the gold color of a plate to "bleed" through the ink colors and produces a faded look. Even a silver color bleeds through ink colors (even when printing just black). But this can also produce some creative effects if used correctly.

    This makes inkjets a good tool for full-color, personalized or short-run T-shirts, mousepads, mugs, etc. Single color laser printer sublimation toner is too powerful for "whites" and produces a noticeable background haze.

    However, many sign shops doing sublimation are interested in producing small wall and desk signs, nameplates, badges, ID and legend plates and other items that are very profitable, but too small to weed. So dye sublimation becomes a very practical tool for this type of application.

    Another reason is that those items more logically fit within the realm of what they are already doing, especially in the customer's mind. The more logically your diversification fits into what you are already doing, the more products you will sell. A tire company wouldn't be very successful selling flowers. It doesn't logically fit.

    Last, but not least, is the fact that the profit margins on sublimated metal plates are equal to (and in many cases higher than) regular vinyl lettered signs, and adding the process requires a very small investment.

    These facts make laser printer sublimation ideal for sign shops. After all, rule #1 in business is: Make Money. Every edge you give yourself just makes that job easier!

    About the Authors: Jack Franklin and John Pratt from Alpha Supply Company. Alpha is an international distributor of laser printer sublimation cartridges and a national distributor of HIX heat presses. Take a guided "A to Z" tour of their "Sublimation For Sign Shops" web site, by clicking here: http://www.alphasupply.com/

    Company
    Home
    Advertising Info
    About Us
    Contact Us
    Privacy Policy
    Site Map
    Resources
    Industry Resources
    Associations
    Retail Sign Shops
    Books
    Product Showcase
    Event Calendar
    Tips & Tricks
    Message Boards
    Classifieds
    Buyer's Guide Listings
    Search
    Add My Company
    Edit My Company

     

    Copyright 1999-2017, All Rights Reserved.